Fabric fold-up Hangar Doors in airport “Dubki”

Curtain gates manufactured by LLC PSK "RATEL ENGINEERING" installed at this facility are made in two versions. The first option is single-section gates that open with a single leaf immediately for the entire width of the opening of 18 meters. The second option is two-section gates that open section by 12 meters, depending on the need to open the left or right side of the gate, and if you want to open the entire opening with a total width of 24 meters, the middle guide post is raised in semi-automatic mode. For emergency opening in the event of a power failure, the drives are unlocked with subsequent manual opening. Gate control is carried out from the gate control panel with the authorized access key of the "turn on", "open", "close", "emergency stop" buttons. Thanks to wind locks on the sides and a rubber seal at the bottom of the door leaf, good sealing is achieved and this type of door can be recommended for heated hangars for year-round use.